Guide

Solar Contractor Insurance: What Installers Usually Carry

By Russ Turrey ยท Published

Short answer: solar contractor insurance usually means a set of business policies, not one product. Most installers carry commercial general liability, workers' compensation (required in many states once you have employees), commercial auto, and coverage for tools and equipment, and many add an umbrella. State licensing boards set the minimums, which differ in Texas, Florida and California.

This guide walks through each policy a solar installer is likely to discuss with an agent, what that policy is built to respond to, and where state rules set a floor. It does not tell you what to buy. Only a licensed agent who knows your business can do that. For the state-by-state license rules in one place, see our page on insurance for solar installers.

What insurance does a solar contractor usually carry?

Solar work mixes construction, electrical work and roof work, so the coverage conversation usually covers the same core lines as other trades. The California Department of Insurance groups business coverage into property insurance and casualty insurance, and it names commercial auto, commercial general liability, commercial umbrella and workers' compensation as the most common casualty lines. For a solar company, the list an agent typically walks through looks like this:

  • Commercial general liability (CGL) for injury to other people or damage to their property caused by your operations or your finished work.
  • Workers' compensation for employees hurt on the job. Whether it is required depends on the state and your headcount.
  • Commercial auto for the trucks, vans and trailers that carry crews and equipment.
  • Inland marine (equipment and installation floaters) for tools, panels, inverters and batteries while they are in transit or waiting to be installed.
  • Commercial umbrella for liability losses that go past the limits of the underlying policies.
  • A contractor license bond where the state requires one. A bond is not insurance for you, as explained below.

Some solar firms that design systems or give technical advice also ask about professional liability. Whether that is relevant depends on the services you sell and how your other policies are written, which is a question for your agent.

What does general liability cover for solar work?

The California Department of Insurance describes three main parts of a CGL policy: premises liability (accidental injury or damage from a condition on your premises or from operations in progress, on or away from your premises), products liability, and completed operations (injury or damage that arises from your finished work). Completed operations matters for solar because an array stays on a customer's roof long after the crew leaves.

The same guide lists major CGL exclusions, including workers' compensation and employers liability, pollution, automobiles, property in your care, custody or control, and damage to your own work. Those exclusions are one reason contractors carry several policies instead of one.

State boards often set a minimum. In Texas, solar installs are done under an electrical contractor license, and TDLR requires electrical contractors to keep at least $300,000 per occurrence, $600,000 aggregate and $300,000 aggregate for products and completed operations. Florida's Construction Industry Licensing Board rule lists $100,000 public liability and $25,000 property damage for a certified or registered solar contractor. California requires LLC licensees to carry liability insurance, with a cumulative limit of at least $1 million when five or fewer people are listed as personnel of record. A minimum is a licensing floor, not a recommendation.

Do solar installers need workers' compensation?

It depends on the state where the crew works:

  • Texas: most private employers may choose not to carry workers' comp. Employers that opt out (non-subscribers) must file an annual notice with the Texas Department of Insurance and tell employees in writing. See our guide to Texas non-subscriber rules for contractors.
  • Florida: construction employers with one or more employees must carry it, including owners who are corporate officers or LLC members, unless a qualifying officer holds an exemption. See our guide to the Florida construction exemption.
  • California: employers must carry it even with one employee. The Contractors State License Board accepts an exemption only from a licensee with no employees, and some classifications, including C-39 Roofing, must carry it whether or not they have employees.

Because solar crews often work on roofs, the injury side of the conversation is real. Federal OSHA requires construction employers to protect workers exposed to falls of 6 feet or more to a lower level. Safety rules are not insurance, but they shape claims and the questions an insurer may ask.

Why does commercial auto come up for solar companies?

Installers move people, ladders, racking and modules every day. The California Department of Insurance explains that a business auto policy can cover liability from autos used in your business and damage to the covered autos, and that it can be set up for owned, hired and non-owned vehicles depending on the coverage purchased. If employees drive their own vehicles to job sites, ask an agent how hired and non-owned auto coverage works for you, and whether a personal auto policy excludes business use. Our guide to state minimum car insurance covers the legal minimums that apply to every vehicle.

What covers panels, inverters and tools before they are installed?

A general liability policy is about claims from other people. It is not built to pay for your own tools or for materials stolen from a job site. The California Department of Insurance describes inland marine as a specialized property coverage for business property in transit, and lists equipment floaters (contractors equipment) and installation floaters among the common forms. For a solar contractor, that is the category an agent would usually look at for tools, and for modules, inverters and batteries between delivery and final hookup. Ask who is responsible for materials at each stage of the job, since your contract with the customer or general contractor may decide that.

When does a commercial umbrella come in?

Every liability policy has limits. The California Department of Insurance explains that a commercial umbrella covers the amount of a loss above the limits of a basic liability policy, and can sit over commercial auto, CGL and employers liability. It also notes that umbrellas commonly carry a self-insured retention, which works like a deductible when no underlying policy applies. Some commercial customers and general contractors ask for higher limits than a single policy provides, and an umbrella is one way businesses meet that request.

Is a contractor bond the same as insurance?

No. In California, every active contractor license needs a $25,000 contractor's bond, and the CSLB explains that the bond is for the benefit of consumers harmed by defective work or license violations and for employees owed wages. In other words, the bond exists to protect the public and workers, not to pay the contractor's own losses. Solar contractors in California hold the C-46 Solar Contractor classification, which covers installing, modifying, maintaining and repairing thermal and photovoltaic solar systems.

What proof of insurance do customers and general contractors ask for?

The usual document is a certificate of insurance. Florida's CILB rule shows what a board expects on one: issue date, agent name, the exact insured business name, insurer, policy number, effective and expiration dates, the required amounts, and the licensee's license number. For home improvement work in California, the CSLB requires contractors to tell clients in writing whether they carry commercial general liability insurance. In Florida, the Department of Financial Services runs public searches for workers' comp proof of coverage and exemptions, which customers and general contractors can use to check a contractor's status.

If you are a homeowner checking a solar company, verify its license with the state board first. Many installers list license details on Solar Near Me, our sister directory of solar installers, and our guide on checking an insurance agent's license explains how to verify the agent who wrote the policy.

How can a solar contractor find a licensed agent who writes this coverage?

Look for an agency that lists business lines, workers' compensation and surety bonds, and that serves contractors in your state. In our directory, each listing shows license status checked against state records and the lines the agency reports. A few examples of listed agencies that report contractor-related lines include Braly Insurance Group in McKinney, Texas, Bellken Insurance Group in Orlando, Florida, and Herriott & Mijailovic Insurance Agency in San Diego, California. Listing is not an endorsement. You can also browse Texas, Florida and California agents, or search for business insurance agents near you.

Before you call, use our free coverage question builder to list your crew size, vehicles, the states you work in and the contract terms customers send you. Then compare what each agent explains. For the full trade picture, read contractor insurance basics and our contractor insurance requirements by state. Solar companies that want to be found by homeowners can also see Solar Near Me for contractors.

What are the key points to remember?

  • Solar contractor insurance is a bundle: CGL, workers' comp where required, commercial auto, inland marine for equipment and materials, and often an umbrella.
  • State boards set minimum liability limits for solar and electrical licenses, and those minimums differ by state.
  • Workers' comp rules differ the most: optional for most Texas private employers, required for Florida construction employers with one employee, and required for California employers with any employee.
  • A license bond protects consumers and workers. It is not coverage for the contractor's own losses.
  • Rules change. Check the state source linked below before you rely on any number here.

This guide explains public rules in plain English. It is not insurance or legal advice, and SmartCoverageCheck is not a licensed agent and does not sell leads. See our disclaimer.

Frequently asked questions

Is solar contractor insurance one policy?

No. It usually refers to several business policies: commercial general liability, workers' compensation where required, commercial auto, inland marine coverage for tools and materials, and often a commercial umbrella. A licensed agent can explain which apply to your business.

How much general liability does a solar contractor need in Florida?

Florida's Construction Industry Licensing Board rule lists a minimum of $100,000 public liability and $25,000 property damage for a solar contractor. That is the licensing minimum, not a recommendation, and customers or general contractors may ask for more.

Do Texas solar installers have to carry workers' comp?

Most private employers in Texas may choose not to. Employers who opt out must file an annual non-subscriber notice with the Texas Department of Insurance and give employees written notice. Employers working on government contracts must cover those employees.

Does general liability cover my own tools and panels?

Generally no. A CGL policy responds to claims from other people. The California Department of Insurance describes inland marine coverage, including equipment and installation floaters, as the property coverage for business property in transit or awaiting installation.

Is a California contractor bond insurance for the contractor?

No. The $25,000 contractor's bond protects consumers harmed by defective work or license violations and employees owed wages.

Sources

  1. California Department of Insurance: Commercial Insurance Guide
  2. TDLR: Electrical contractor insurance requirements
  3. TDI: Workers' compensation insurance guide
  4. Florida Administrative Code 61G4-15.003, Public Liability Insurance
  5. Florida DFS: Workers' comp coverage requirements
  6. Florida DFS: Proof of Coverage search
  7. CSLB: C-46 Solar Contractor classification
  8. CSLB: Workers' compensation requirements
  9. CSLB: Bond requirements
  10. CSLB: Licenses for LLCs
  11. CSLB: Commercial general liability disclosure (home improvement)
  12. OSHA 1926.501: Duty to have fall protection

About the author

Russ Turrey owns and edits SmartCoverageCheck. He writes in plain English from official sources and is not a licensed insurance agent. How we research and review.